Ojniční ložiska ACL (Race Series Calico CT-1 coating) 6B2150HC-010

Detailní popis produktu

 Ojniční ložiska (ACL Race Series Calico CT-1 coating) 6B2150HC-010

 

Popis výrobce:

CT-1 is a Dry Film Lubricant coating that helps reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt. CT-1 is specifically engineered to withstand the extreme conditions of today’s high performance engines. Professional engine builders enjoy a higher level of confidence with increased embedability; strength and durability.

PROCESS

CT-1 Dry Film Lubricant coating is applied as a spray process. Different surface preparation methods appropriate for the substrates will be used prior to the coating process. Coating thickness is varied to suit the application. Typical coating thickness for engine bearings is 0.00025" to 0.00030" inch (6 to 7.5 microns)

ADVANTAGES

Provides intermittent dry lubrication; not affected by dust or dirt; low coefficient of friction. Thin coating to accommodate assembly constraints; chemical resistance; corrosion protection; reduced friction and drag resulting in decreased parasitic losses.

• Corrosion Protection
• Increased Lubricity
• Low Coefficient of Friction
• Oil and Fuel Resistant

EMBEDABILITY

CT-1 coated bearings have excellent embedability characteristics; allowing debris contaminates to embed in the bearing; avoiding damage to the crank

EXTREME OIL TEMPERATURES

CT-1 coated bearings have shown a reduction in oil temperatures as much as 8°C - 11°C / 15˚F - 20˚F. Lower oil temperatures also aid in the loss of viscosity due to extreme heat.

LOW OIL PRESSURE/OIL STARVATION

Theoretically a crankshaft rides on a thin film of oil that protects both the crank and bearing. Real world experience such as cold starts and rough terrain conditions have proven otherwise. CT-1 coated engine bearings provide a dry film lubricant that protects against intermediate oil starvation

 

> 
Aplikace: Ford/Falcon XK; XL; XM; XP; XR/OHV 12v/144, Ford/Fairmont XP; Falcon XK; XL; XM; XP; XR/OHV 12v/170, Ford/Fairmont XW; Falcon XM; XP; XR; XT; XW/OHV 12v/188, Ford/Cortina; Fairlane ZA; ZB; ZD; ZF; Fairmont XA; XB; XP; XR; Falcon XA; XB; XL; XM; XP; XR; XY/OHV 12v/200 Non X Flow, Ford/Falcon EA/SOHC 12v/3,2L, Ford/Cortina; F100; Fairmont XC; XD/OHV 12v/3,3L X Flow Cast Iron Head, Ford/Fairlane NA; NC; Falcon EA; EB; LTD DA; DC/SOHC 12v/3,9L, Ford/Fairlane BA; BF; Falcon BA; BF; FG; Ute BA; BF; FG; Territory SX; SY; SZ/DOHC 24v/4,0L Barra, Ford/Falcon BA; BF; FG; Ute BA; BF; FG; Territory SY; FPV F6; F6-E; F6 Tornado; F6 Typhoon; F6X/DOHC 24V Turbo/4,0L Barra Turbo, Ford/Falcon BA/DOHC 24v/4,0L E-Gas EFI, Ford/Fairlane NB; NC; Fairmont EB; ED; Falcon EB; ED; XF; LTD/SOHC 12v/4,0L EB-ED, Ford/Cortina/OHV 12v/250 Non X Flow, Ford/Fairlane ZD/OHV 12v/250 Non X Flow, Ford/Fairlane ZF/OHV 12v/250 Non X Flow, Ford/Fairlane ZG/OHV 12v/250 Non X Flow, Ford/Fairmont XA/OHV 12v/250 Non X Flow, Ford/Fairmont XB/OHV 12v/250 Non X Flow, Ford/Fairmont XY/OHV 12v/250 Non X Flow, Ford/Falcon XA/OHV 12v/250 Non X Flow, Ford/Falcon XB/OHV 12v/250 Non X Flow, Ford/Falcon XY/OHV 12v/250 Non X Flow, Ford/Cortina/OHV 12v/3,3L X Flow Alloy Head, Ford/Fairmont XD/OHV 12v/3,3L X Flow Alloy Head, Ford/Fairmont XE/OHV 12v/3,3L X Flow Alloy Head, Ford/Fairmont XF/OHV 12v/3,3L X Flow Alloy Head, Ford/Falcon XD/OHV 12v/3,3L X Flow Alloy Head, Ford/Falcon XE/OHV 12v/3,3L X Flow Alloy Head, Ford/Falcon XF/OHV 12v/3,3L X Flow Alloy Head, Ford/Fairlane NF/SOHC 12v/4,0L EF-EL, Ford/Fairlane NL/SOHC 12v/4,0L EF-EL, Ford/Fairmont EF/SOHC 12v/4,0L EF-EL, Ford/Fairmont EL/SOHC 12v/4,0L EF-EL, Ford/Fairmont XR6/SOHC 12v/4,0L EF-EL, Ford/Fairmont Longreach Ute/SOHC 12v/4,0L EF-EL, Ford/Falcon EF/SOHC 12v/4,0L EF-EL, Ford/Falcon EL/SOHC 12v/4,0L EF-EL, Ford/Falcon XR6/SOHC 12v/4,0L EF-EL, Ford/Longreach Ute/SOHC 12v/4,0L EF-EL, Ford/Fairlane ZJ/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Fairlane ZK/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Fairlane ZL/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Fairmont XD/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Fairmont XE/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Fairmont XF/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Fairmont LTD/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Falcon XD/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Falcon XE/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Falcon XF/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Falcon LTD/OHV 12v/4,1L X Flow Alloy Head (250 X Flow), Ford/Cortina/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Fairlane ZH/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Fairlane ZJ/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Fairmont XC/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Fairmont XD/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Fairmont LTD/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Falcon XC/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Falcon XD/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Falcon LTD/OHV 12v/4,1L X Flow Cast Iron Head (250 X Flow), Ford/Fairlane AU/SOHC 12v/4,0L Intech, Ford/Fairlane II/SOHC 12v/4,0L Intech, Ford/Fairlane III/SOHC 12v/4,0L Intech, Ford/Fairlane XR6/SOHC 12v/4,0L Intech, Ford/Fairmont AU/SOHC 12v/4,0L Intech, Ford/Fairmont II/SOHC 12v/4,0L Intech, Ford/Fairmont III/SOHC 12v/4,0L Intech, Ford/Fairmont XR6/SOHC 12v/4,0L Intech, Ford/Falcon AU/SOHC 12v/4,0L Intech, Ford/Falcon II/SOHC 12v/4,0L Intech, Ford/Falcon III/SOHC 12v/4,0L Intech, Ford/Falcon XR6/SOHC 12v/4,0L Intech 

 

APLIKAČNÍ KATALOG ACL

Obrázek je pouze ilustrační.

ACL je australská společnost s více než 70letou tradicí výroby přesných ložisek motorů, sídlící v Launcestonu, Tasmánie. Firma je významným dodavatelem OEM ložisek pro automobilový průmysl a zároveň nabízí rozsáhlý sortiment náhradních dílů pro globální aftermarket. Její produkty jsou známé svou vysokou kvalitou, precizností, robustní metalurgií a výkonem.

ACL má bohatou historii v motorsportu, sahající až do 60. let, kdy vyráběla ložiska pro tým Brabham ve Formuli 1. Její RACE Series Performance Engine Bearings si našly uplatnění v závodech jako australské Supercars, drag racing, rally a drift. Díky tomu jsou často první volbou pro motorové specialisty po celém světě.

Společnost nabízí jednu z největších nabídek ložisek motorů na aftermarketu, pokrývající přes 200 aplikací pro australské, americké, japonské, korejské a evropské vozy. Sortiment se neustále rozšiřuje o nově uvedené motory.

ACL disponuje vysokou úrovní vertikální integrace, zahrnující návrh a výrobu materiálů, nástrojů a složitých výrobních procesů. Firma se pyšní certifikacemi ISO9001:2015 (kvalita), ISO14001:2015 (ekologie) a ISO451001:2018 (bezpečnost práce).

Díky této kombinaci tradice, inovace a zaměření na výkon si ACL vybudovalo celosvětovou reputaci v oblasti motorových ložisek.